Seriel kommunikation

Internt Salg: Heidi Hansen, 43 200 760 / Produktansvarlig: Kenn Krygermeier, 43 200 751

Seriel kommunikation

Seriel kommunikation over ethernet fra MOXA

Metric har valgt samarbejdspartnere som sikrer tilgængelighed af serielle kommunikationsprodukter i mange år fremover.

Nøgleprodukterne er:

Serielle Device Serverere

  • 1/2/4/8/16/32-portede seriel-til-Ethernet device servere
  • 1/2-portede seriel-til-WiFi device servere

Embeddede Netværk

  • Trådet og WiFi embedded device servere

Mediekonvertere

  • Seriel-til-seriel konvertere
  • Seriel-til-fiber konvertere

Multiportede Serielle kort

  • 2/4/8-portede ISA serielle kort
  • 2/4/8-portede PCI og UPCI serielle kort
  • 2/4/8-portede PC/104 og PC/104-Plus serielle kort
  • 2/4/8-portede PCI Express serielle kort

Industriel USB

  • 1/2/4/8/16-portede USB-til-seriel konvertere  


Industrielle ethernet løsninger til industrien

MOXA er meget dedikeret til at sikre tilgængelighed af deres serielle produkter.  Siden 1987 har MOXA hvert år investeret millioner af dollars til at udvikle innovative og brugervenlige produkter, og tilbyder nu mere end 500 modeller af serielle kommunikationsprodukter.

MOXA tilbyder hårdføre produkter tilpasset industrien og leverer også produkter med adskillige certificeringer, såsom Class I, Division 2/ATEX Zone 2 for barske miljøer, EN 50155 for Rail applikationer, NEMA TS2 for intelligente transportsystemer og IEC 61850-3 for power automation systemer.

Nedenunder vises enkelte produkteksempler.

NPort W2150A/NPort W2250A

1 and 2-port RS-232/422/485 IEEE 802.11a/b/g wireless device servers
  • Link any serial or Ethernet device to an IEEE 802.11a/b/g network
  • 921.6 kbps baudrate for RS-232/422/485 transmissions
  • Web-based configuration using built-in Ethernet or WLAN
  • Enhanced surge protection for serial, LAN, and power
  • Remote configuration with HTTPS, SSH
  • Secure data access with WEP, WPA, WPA2
  • Built-in WLAN site survey tool
  • Fast automatic wireless fast roaming
  • Off-line port buffering and serial data log
  • Dual power inputs (1 screw-type power jack, 1 terminal block)
  • Supports wireless clients

MiiNePort W1 Series

Wireless LAN embedded serial device servers
  • IEEE 802.11 b/g compatible
  • AES, WEP 64/128-bit, WPA, WPA2, PSK, 802.11i security support
  • Low power consumption (1.18W)
  • 1 Serial port, up to 921.6kbps
  • 1 Ethernet port, 10/100Mbps
  • HTTPS/SSH support for configuration
  • Fast roaming to enhance connection reliability

MGate 5101-PBM-MN Series

1-port PROFIBUS-to-Modbus TCP gateways
  • Protocol conversion between PROFIBUS and Modbus TCP
  • Automatic scan of PROFIBUS devices for easy configuration
  • Redundant dual DC power inputs and relay output supported
  • Embedded data packet analyzer and diagnostic tool
  • Web-based GUI for I/O data visualization
  • -40 to 75°C wide operating temperature models available

C320Turbo (PCI Express)

8 to 32-port intelligent PCI Express serial board
  •  PCI Express x 1 compliant
  •  Low profile form factor fits small-sized PCs
  •  Supports 128 high-performance serial ports per system
  •  Dramatically decreases host CPU load
  •  Modular design makes port expansion easy
  •  Monitor transmission status with LEDs on the module and two 7-segment displays
  •  Drivers provided for a broad selection of operating systems
  •  460.8 kbps maximum baudrate

UPort 204/UPort 207

4 and 7-port entry-level USB hubs
  • Hi-Speed USB 2.0 for up to 480 Mbps USB transmission
  • USB-IF Certification
  • Compatible with USB 1.1 devices
  • 15 KV ESD Level 4 protection for all USB ports
  • Wall mountable
  • Comprehensive diagnostic LEDs
  • Full 500 mA of power per port
  • Choose bus power or external power (UPort™ 204 only)

ICF-1280I Series

2-port industrial PROFIBUS-to-fiber converters
  • Redundant fiber ring with zero recovery time
  • Examine network-wide fiber communication from a single converter
  • Auto baudrate detection and data speed up to 12 Mbps
  • PROFIBUS bus fail prevents corrupted datagram in functioning segment
  • Alarm by relay output
  • 2 kV galvanic isolation protection
  • Dual power inputs for redundancy
  • Extends PROFIBUS transmission distance up to 45 km
  • Wide temperature model available for -40 to 75°C environments
  • Supports Fiber Signal Intensity Diagnosis